SANferongjistandardpapersurfacegypsumboardisgypsumasthemainrawmaterial,mixedwithfiberandadmixturetoformthecorematerial,andwiththefacepaperfirmlycombinedwiththeboard.ThemainrawmaterialsaregypsumplasterofParis,paperboard,binder,coagulant,fillingmaterial,etc.Naturalgypsumoreisthemainrawmaterialformakingpapergypsumboard.ThecompanyUSESahigh-purityenvironmental-friendlydesulfurizationgypsum.
Product introduction
SAN ferongji standard paper surface gypsum board is gypsum as the main raw material, mixed with fiber and admixture to form the core material, and with the face paper firmly combined with the board. The main raw materials are gypsum plaster of Paris, paperboard, binder, coagulant, filling material, etc. Natural gypsum ore is the main raw material for making paper gypsum board. The company USES a high - purity environmental - friendly desulfurization gypsum.
Product features
Green environmental protection
SAN francisco-based standard paper plasterboard is environmental desulfurization plasterboard as raw material, mixed with fiber and additives constitute the core material, so that the plasterboard has a certain function of moisture absorption, green environmental protection.
The intensity of higher
SAN ferronji standard paper gypsum board has a certain compression and impact strength, suitable for the home in the common areas of regular activity.
Construction is convenient
Plasterboard can be nailed, planed, sawed and glued to the performance, used for interior decoration, can achieve an ideal decorative effect, only cutting paper knife can be optional to cut plasterboard, construction is very convenient, with it to do decorative materials can greatly improve the construction efficiency.
Save a space
Use gypsum board as wall material, can save the wall area, increase the utilization rate of building space. Plasterboard does inside partition wall still can facilitate indoor pipeline laid and overhaul.
Comfortable living
The porosity of gypsum board is larger and the pore structure is distributed properly. When indoor humidity is higher, can hygroscopic, and when air is dry, can release a part moisture again, have certain regulation effect to indoor humidity accordingly, because plasterboard has this kind of distinctive "breath performance", can adjust indoor humidity inside certain range, make living condition more comfortable.
Product specification and performance
specifications
(mm)
The width of the
(mm)
The length of the
(mm)
Longitudinal fracture load
(N)
Transverse fracture load
(N)
Combustion performance
And the level of
Coefficient of thermal conductivity
(W/m)
9.5
1200
2400/3000
> 360
> 140
Flame retardant A2
0.18
12
1200
2400/3000
> 500
> 180
Flame retardant A2
0.18
15
1200
2400/3000
> 650
> 220
Flame retardant A2
0.18
SAN fulong base paper surface gypsum board is made of gypsum as the main raw material, mixed with fiber and admixture to form the core material, and firmly combined with the surface paper board. The main raw materials are gypsum plaster of Paris, paperboard, binder, coagulant, filling material, etc. Natural gypsum ore is the main raw material for making paper gypsum board. The company USES a high - purity environmental - friendly desulfurization gypsum.
Drywall installation
1. Gypsum board shall be installed from one end of the wall in accordance with the direction of the c-shaped keel.
2. Two adjacent gypsum boards naturally close together.
3. The lower opening of gypsum board is larger than 10mm from the ground, so avoid direct contact with the ground.
4. The top of the gypsum board should be with the roof tight, no gap (sound insulation, firewall exception).
5. The single-layer gypsum board on both sides of the keel must be installed at staggered joints.
6. The two layers of gypsum board on the inside of the same side do not need to be installed with staggered joints.
7. When the height of the partition wall is larger than the plasterboard for vertical splicing, both sides of the plasterboard and the same inside and outside two layers of plasterboard transverse joints must be staggered.
8. The plasterboard in the door frame should be put together the gap in the lintel, the lintel on both sides of the plasterboard should be staggered.
9. Self-tapping screw shall be driven with an electric screw gun.
10. Tapping screws should be sunk into the surface of gypsum board to a depth of 0.5mm -- 1mm.
11. The distance between the self-tapping screw and the enveloping edge is 10mm-15mm, and the distance from the cutting edge is 15mm-20mm.
Surface treatment of gypsum board
1. Seam treatment:
SAN flonkey offers a range of joint products including SAN flonkey joint filler, SAN flonkey joint paper tape, and SAN flonkey non-crack fiber tape. Users can choose different joint materials according to the required construction speed, ease of installation, and work characteristics.
2. Plastering treatment:
Gypsum board surface can be applied 2 -- 5mm thick SAN Franciscan full batch of gypsum putty.
Drywall finish
When using heavier vinyl wallpaper, must consult the manufacturer about the information, in order to facilitate the construction of base coating.
Product introduction
SAN ferongji standard paper surface gypsum board is gypsum as the main raw material, mixed with fiber and admixture to form the core material, and with the face paper firmly combined with the board. The main raw materials are gypsum plaster of Paris, paperboard, binder, coagulant, filling material, etc. Natural gypsum ore is the main raw material for making paper gypsum board. The company USES a high - purity environmental - friendly desulfurization gypsum.
Product features
Green environmental protection
SAN francisco-based standard paper plasterboard is environmental desulfurization plasterboard as raw material, mixed with fiber and additives constitute the core material, so that the plasterboard has a certain function of moisture absorption, green environmental protection.
The intensity of higher
SAN ferronji standard paper gypsum board has a certain compression and impact strength, suitable for the home in the common areas of regular activity.
Construction is convenient
Plasterboard can be nailed, planed, sawed and glued to the performance, used for interior decoration, can achieve an ideal decorative effect, only cutting paper knife can be optional to cut plasterboard, construction is very convenient, with it to do decorative materials can greatly improve the construction efficiency.
Save a space
Use gypsum board as wall material, can save the wall area, increase the utilization rate of building space. Plasterboard does inside partition wall still can facilitate indoor pipeline laid and overhaul.
Comfortable living
The porosity of gypsum board is larger and the pore structure is distributed properly. When indoor humidity is higher, can hygroscopic, and when air is dry, can release a part moisture again, have certain regulation effect to indoor humidity accordingly, because plasterboard has this kind of distinctive "breath performance", can adjust indoor humidity inside certain range, make living condition more comfortable.
Product specification and performance
specifications
(mm)
The width of the
(mm)
The length of the
(mm)
Longitudinal fracture load
(N)
Transverse fracture load
(N)
Combustion performance
And the level of
Coefficient of thermal conductivity
(W/m)
9.5
1200
2400/3000
> 360
> 140
Flame retardant A2
0.18
12
1200
2400/3000
> 500
> 180
Flame retardant A2
0.18
15
1200
2400/3000
> 650
> 220
Flame retardant A2
0.18
SAN fulong base paper surface gypsum board is made of gypsum as the main raw material, mixed with fiber and admixture to form the core material, and firmly combined with the surface paper board. The main raw materials are gypsum plaster of Paris, paperboard, binder, coagulant, filling material, etc. Natural gypsum ore is the main raw material for making paper gypsum board. The company USES a high - purity environmental - friendly desulfurization gypsum.
Drywall installation
1. Gypsum board shall be installed from one end of the wall in accordance with the direction of the c-shaped keel.
2. Two adjacent gypsum boards naturally close together.
3. The lower opening of gypsum board is larger than 10mm from the ground, so avoid direct contact with the ground.
4. The top of the gypsum board should be with the roof tight, no gap (sound insulation, firewall exception).
5. The single-layer gypsum board on both sides of the keel must be installed at staggered joints.
6. The two layers of gypsum board on the inside of the same side do not need to be installed with staggered joints.
7. When the height of the partition wall is larger than the plasterboard for vertical splicing, both sides of the plasterboard and the same inside and outside two layers of plasterboard transverse joints must be staggered.
8. The plasterboard in the door frame should be put together the gap in the lintel, the lintel on both sides of the plasterboard should be staggered.
9. Self-tapping screw shall be driven with an electric screw gun.
10. Tapping screws should be sunk into the surface of gypsum board to a depth of 0.5mm -- 1mm.
11. The distance between the self-tapping screw and the enveloping edge is 10mm-15mm, and the distance from the cutting edge is 15mm-20mm.
Surface treatment of gypsum board
1. Seam treatment:
SAN flonkey offers a range of joint products including SAN flonkey joint filler, SAN flonkey joint paper tape, and SAN flonkey non-crack fiber tape. Users can choose different joint materials according to the required construction speed, ease of installation, and work characteristics.
2. Plastering treatment:
Gypsum board surface can be applied 2 -- 5mm thick SAN Franciscan full batch of gypsum putty.
Drywall finish
When using heavier vinyl wallpaper, must consult the manufacturer about the information, in order to facilitate the construction of base coating.
